Siemens SIMATIC ET 200pro - 3.2 Installation measurements and clearances

SIMATIC – ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
3-3
3.2 Installation measurements and clearances
Measurement
s
module mm
Installation
width
Rear wall bus module for motor starters and special modules 110
Installation
height
Without power connector:
• Special modules
• Standard motor starter
• High feature motor starter
230
230
230
Installation
depth
On wide module holder with rear wall bus module for:
• Special modules
- Maintenance isolating module
- Safety local maintenance isolating module
- Disconnecting module 400 V
• Standard motor starter
• High feature motor starter with sensor cables
190
190
170
170
180
Minimum
spacing
for installa-
tion and
wiring
• Above and below the rear wall bus module
• To the left of the interface module IM 154-.
• To the right of the ET 200pro terminating module
• Below the motor starter and special modules
25
15
15
50
Table 3-1:Installation measurements and clearances