Connecting
SIMATIC – ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
9-9
9.3 Power jumper
The power jumper serves to loop through the main power from a special mod-
ule or motor starter to the next motor starter.
The following table shows the assignment of the contacts:
9.4 Inputs with M12 connection
The high feature motor starters have 4 digital inputs for 2-wire and
3-wire sensors with M12 connecting technology. The inputs can be parameter-
ized for various functions (see Chapter 10.7).
The following table shows the assignment of the M12 connectors:
Pin Socket Assignment
1 1 Phase L1
2 2 Phase L2
3 3 Phase L3
4 4 Not used
PE (yellow / green)
Table 9-3: Power jumper
Socket Assignment
1 +24 V
2
1)
DI x
30 V
4
1)
DI x
5FE
1) sockets 2 and 4 are jumpered inside the device
Table 9-4: Assignment M12 connection
43
21
5
To Next Page
Loading...
