Siemens SIMATIC ET 200pro - Figure 1-1: ET 200 Pro with Motor Starters; Figure 1-3: ET 200 Pro with Motor Starters up to Category 4

SIMATIC - ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
1-7
ET 200pro with motor starters up to category 4
Figure 1-3: ET 200pro with motor starters up to category 4
Parts list
The following parts list contains all the components required for an ET 200pro
sample configuration with motor starters (see Figure 1-3).
Abbreviatio
n
Order number Description
— 6ES7194-4GB10-0AA0 Wide module holder (for motor starters), (length 1 m)
— 6ES7154-2AA00-0AB0 Interface module IM 154-2 DP high feature
with terminating module
— 3RK1922-2BA00 Rear wall bus module for special modules and motor starter
— 3RK1922-2BA01 Rear wall bus module for safety local maintenance isolating
module
F-RSM 3RK1304-0HS00-7AA0 Safety local maintenance isolating module
ASM-400V 3RK1304-0HS00-8AA0 Disconnecting module 400 V
DSe ST 3RK1304-5xS40-4AA0
1)
DSe standard
RSe HF 3RK1304-5xS40-3AA0
1)
RSe reversing starter, High feature
— 3RK1922-2BQ00 Power jumper
— 3RK1902-0CJ00
3RK1902-0CK00
Sealing cap for power bus (10 units)
(1 unit)
— 3RX9802-0AA00 Sealing cap for unused M12 connections
— 3RK1911-2BE10 Connector set for power infeed (X1) for 4 mm
2
HAN Q4/2
— 3RK1902-0CE00 Connector set for motor connection (X2) for 1.5 mm
2
HAN
Q8/0
1) x = select the current range according to the load you have connected
Interface
module
Safety local
maintenance
Isolating module
400 V
RSe, sRSSte / sRSte;
High feature
DSe,
standard
Wide module holder (for motor starter)
Terminating module
Isolating module
Power jumper
Sealing cap
Motor connectionPower infeed
ON
OFF
O