SIMATIC - ET 200pro motor starter
10-48 GWA 4NEB 950 5661-02 DS 04
Logbook – trips
The 'Logbook – trips' records all general faults. The ID numbers of the actual
causes of faults are entered (e.g. 'Switching element overload').
Observe the following points:
• The logbook - trips is deleted using the 'Delete logbook – trips' command.
Logbook – events
The 'Logbook – events' records all warnings and certain actions.
Observe the following points:
• 'Incoming' and 'outgoing' events are entered.
'Incoming' means: The event is occurring.
'Outgoing' means: The event is being acknowledged.
The entries are distinguished from each other by means of a preceding char-
acter in the data record
(+: incoming, –: outgoing).
• The logbook - events is deleted using the 'Delete logbook - events' com-
mand.
Logbook – device errors
The 'Logbook – device errors' records all the device errors that occur.
Observe the following points:
The 'logbook – device errors' cannot be deleted.
To Next Page
Loading...
