Siemens SIMATIC ET 200pro - Page 23

SIMATIC - ET 200pro motor starter
GWA 4NEB 950 5661-02 DS 04
1-5
Crimping
tools
... serve to secure the bushing and pin con-
tacts at the ends of the cables.
... are available for 0.14 - 4 mm
2
and 4 -
6mm
2
.
Dismounting
tools
... are used to dismount the contacts from
the plug cases.
... are available for HAN Q4/2 and
HAN Q8/0.
M12 sealing
cap with O-
ring
... serves to cover the inputs that are not
required.
PC cable with
RS232
... with optical interface for communication
with motor starters
Software
motor starter
ES on CD-
ROM
... for:
• Parameter assignment
• Operation and observation
• Diagnostics
• Monitoring during operation
• Output of statistical data for preventive
maintenance, e.g. hours of operation
(see Chapter 4.7).
Component Function Drawing
Table 1-4: Accessories (cont.)