Preface
SIMATIC - ET 200pro motor starter
ii GWA 4NEB 950 5661-02 DS 04
Approvals
The decentralized peripheral device ET 200pro motor starters product range
corresponds to the following sets of regulations:
• EC Directive 73/23/EEC for low voltages
• EC Directive 89/336/EEC for electromagnetic compatibility
• Underwriters Laboratories, Inc.: UL 508 registered (Industrial Control Equipment)
• Canadian Standards Association: CSA C22.2 number 142, tested (Process Control
Equipment)
Standards, certificates and approvals
The decentralized peripheral device ET 200pro meets the requirements and
criteria of IEC 61131-2, Part 2 and the requirements for obtaining the CE
marking. CSA and UL approval for the ET 200pro is pending.
You will find detailed information on the relevant standards, certificates and
approvals in the manual SIMATIC 'ET 200pro decentralized peripheral
device'.
Disclaimer of liability
The products described in this manual were developed to discharge safety-
oriented functions as part of a higher-order system or machine. A complete
safety system generally comprises sensors, analyzers, signaling devices and
concepts for safe shutdowns. The manufacturer of the system or machine is
responsible for ensuring correct overall functionability. Siemens AG, its sub-
sidiaries and its affiliated companies (hereinafter designated “Siemens”) are
not in a position to guarantee all features of a higher-order system or
machine not designed by Siemens.
Siemens also refuses to accept liability for recommendations, express or
implicit, in the subsequent description. No warranty, guarantee or liability
claims above and beyond the General Terms and Conditions of Supply and
Sale of Siemens can be derived from the subsequent description.
Note
This is a product for environment A. In household environments, this device
can cause unwanted radio interference.
In this case, you are obliged to institute appropriate measures.
To Next Page
Loading...
