SIMATIC - ET 200pro motor starter
3-12 GWA 4NEB 950 5661-02 DS 04
Note
We recommend that the maintenance and service personnel be informed in
detail regarding correct handling of the motor starter prior to handover of the
system in order to be able to use the advantages of the ET 200pro from the out-
set in the event of a replacement.
8
9
Unscrew the 3 Philips screws on
the motor starter.
Remove the motor starter
towards the front.
Drawing Procedure/Description
Table 3-7:Removing motor starters (cont.)
9
8
8
8
To Next Page
Loading...
