Siemens Simodrive 611 Planning Guide

5
05.01
5.7 Control module ”SIMODRIVE 611 universal”
5-128
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
The control module has the following features:
S Control module versions
– 1–axis, resolver, n/M–set
– 1–axis, resolver, n/M–set, positioning
– 2–axis, resolver, n/M–set
– 2–axis, resolver, n/M–set, positioning
– 2–axis, sin/cos 1 Vpp / absolute value encoder, n/M–set
– 2–axis, sin/cos 1 Vpp / absolute value encoder, n/M–set, positioning
S Software and data
The software and the user data are saved on an interchangeable memory
module.
S Terminals and operator control elements
– 2 analog inputs and 2 analog outputs per drive
– 4 digital inputs and 4 digital outputs per drive
– 2 test sockets
– POWER–ON RESET button with integrated LED
– Display and operator control unit
S Safe start inhibit (refer to Section 9.5)
S Serial interface (RS232, RS485)
S Optional modules
– Optional terminal module, 8 digital inputs and 8 digital outputs
– Option module, PROFIBUS–DP1
– Option module, PROFIBUS–DP2 (from SW 3.1)
– Option module, PROFIBUS–DP3 (from SW 3.1)
Features
5 Control Modules

Siemens Simodrive 611 Specifications

General

Brand	Siemens
Model	Simodrive 611
Category	Media Converter
Language	English