Siemens Simodrive 611 Planning Guide

1
05.01
1.2 Engineering steps
1-22
 Siemens AG 2001 All rights reserved
SIMODRIVE 611 Planning Guide (PJU) – 05.01 Edition
Selecting the components
Motor selection refer to Section 3
refer to Section 3Position sensing
refer to Section 4
Power modules
refer to Section 5
Control modules
refer to Section 6
Infeed modules
refer to Section 7
Line supply connection
Fig. 1-4 Selecting the components
Connection configuration
Important
circuit information
refer to Section 9
refer to Section 10Electrical cabinet, EMC
refer to Section 11Block diagrams
refer to Section 12Connecting diagrams
Dimension sheets refer to Section 13
Fig. 1-5 Connection configuration
The cable and conductor protective devices and switching devices should
be selected taking into account the relevant Standards, regulations and the
requirements at the point of installation.
Reference: /NCZ/ Catalog Connection Technology
and System Components
Reference: /NSK/ Catalog Low–Voltage
Switchgear
J
Phase 1 when
engineering
Phase 2 when
engineering
Selecting cable
and conductor
protective devices
and switching
devices
1 Overview of the Drive System

Siemens Simodrive 611 Specifications

General

Brand	Siemens
Model	Simodrive 611
Category	Media Converter
Language	English