Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
6.20 AT+CMUT Microphone mute control
Description
Thi
s command is used to enable and disable the uplink voice muting during a voice call or a video
call which is connected. If there is not a connected call, write command can’t be used.
When all calls are disconnected, the Module sets the subparameter as 0 automatically.
SIM PIN References
NO 3GPP TS 27.007
Syntax
Test Command Responses
+CMUT: (list of supported <mode>s)
OK
AT+ CMUT? +CMUT: <mode>
OK
Write Command Responses
AT+CMUT=<mode> OK
Defined values
<mode>
0 – mute off
Examples
AT+CMUT=1
OK
+CMUT: 1
6.21 AT+MORING Enable or disable report MO ring URC
Description
This command is used to enable or disable report MO ring URC
SIM PIN References
To Next Page
Loading...
Need help?
General
