SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
137
<acdb file>
<acdb file> file(s) in the directory /data with suffix: acdb, except six acdb file used by system
Examples
AT+CACDBFN=Handset_cal.acdb
OK
AT+
CACDBFN
?
+CACDBFN: Handset_cal.acdb
OK
AT+CACDBFN=?
+CACDBFN: (Handset_cal.acdb,Handset_tianmai.acdb)
OK
6.26 AT+CPCMREG USB audio control
Description
This command is used to start/stop usb audio function.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CPCMREG=? +CPCMREG: (list of supported < mode >s)
OK
Read Command
Responses
AT+ CPCMREG? +CPCMREG: <mode>
OK
Write Command Responses
AT+CPCMREG=<mode>
OK
ERROR
Defined values
<mode>
0 – stop usb audio function,need used after call stop.
1 – start usb audio function,need used after call start(ATDxxx;)
Examples
SIMCOM CONFIDENTIAL FILE