SimCom SIM7500 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
381
17.13 AT+ CGPSXE Enable/Disable GPS XTRA function
Description
This command is used to enable/disable the GPS XTRA function.
NOTE:
The function will take effect after restarting the module. XTRA function must download
the assistant file from network by HTTP, so the APN must be set by AT+CGCONT command.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CGPSXE=?
+CGPSXE: (list of supported <on/off>s)
OK
Read Command
Responses
AT+CGPSXE?
+CGPSXE: <on/off>
OK
Write Command
Responses
AT+CGPSXE=<on/off> OK
ERROR
Defined values
<on/off>
0 – Disable GPS XTRA
1 – Enable GPS XTRA
Examples
AT+CGPSXE=?
+CGPSXE: (0,1)
OK
AT+CGPSXE=0
OK
17.14 AT+CGPSXD Download XTRA assistant file
Description
This command
is used to download the GPS XTRA assistant file from network through http
protocol. Module will download the latest assistant file form server and write the file into module.
SIMCOM CONFIDENTIAL FILE

SimCom SIM7500 Series Specifications

General

Brand	SimCom
Model	SIM7500 Series
Category	Control Unit
Language	English