Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
5.5 AT+CCUG Closed user group
Description
This command allows control of the Closed User Group supplementary service. Set command
enables the served subscriber to select a CUG index, to suppress the Outgoing Access (OA), and to
suppress the preferential CUG.
NOTE: This command not supported in CDMA/HDR mode.
SIM PIN References
YES 3GPP TS 27.007
Syntax
AT+CCUG=? OK
ERROR
Read Command Responses
AT+CCUG?
+CCUG: <n>,<index>,<info>
OK
ERROR
+CME ERROR: <err>
Write Command Responses
AT+CCUG=
<n>[,<index>[,<info>]]
OK
AT+CCUG Set default value:
OK
Defined values
<n>
0 – disable CUG temporary mode
1 – enable CUG temporary mode
0...9 – CUG index
10 – no index (preferred CUG taken from subscriber data)
To Next Page
Loading...
