SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
331
The directory to be listed. If the directory contains non-ASCII characters, the <dir> parameter
should contain a prefix of {non-ascii}.
<len>
The length of data reported
<err>
The result code of the listing
<using_cache>
0 – Do not use cache
1 – Use cache(Data will be output using AT+CFTPSCACHERD command)
Examples
AT+CFTPSLIST=”/testd”
OK
+CFTPSLIST: DATA,193
drw-rw-rw- 1 user group 0 Sep 1 18:01 .
drw-rw-rw- 1 user group 0 Sep 1 18:01 ..
-rw-rw-rw- 1 user group 2017 Sep 1 17:24 19800106_000128.jpg
+CFTPSLIST: 0
AT+CFTPSLIST
OK
+CFTPSLIST: DATA,193
drw-rw-rw- 1 user group 0 Sep 1 18:01 .
drw-rw-rw- 1 user group 0 Sep 1 18:01 ..
-rw-rw-rw- 1 user group 2017 Sep 1 17:24 19800106_000128.jpg
+CFTPSLIST: 0
15.4.9 AT+CFTPSGETFILE Get a file from FTPS server to EFS
Description
This command is used to download a file from FTPS server to module EFS.
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+CFTPSGETFILE=?
+CFTPSGETFILE: [{non-ascii}]"FILEPATH",(0)[,(0-2147483647)]
OK
Write Command Responses
AT+CFTPGETFILE=
OK
SIMCOM CONFIDENTIAL FILE