SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
383
NO
Vendor
Syntax
Test Command Responses
AT+CGPSXDAUTO=? +CGPSXDAUTO: (list of supported <on/off>s)
OK
Read Command
Responses
AT+CGPSXDAUTO? +CGPSXDAUTO: <on/off>
OK
Write Command
Responses
AT+CGPSXDAUTO=<on/o
ff>
OK
ERROR
Defined values
<on/off>
0 – disable download automatically
1 – enable download automatically
NOTE: Some URCs will report when downloading, it’s same as AT+CGPSXD command.
Examples
AT+CGPSXDAUTO=?
+CGPSXDAUTO: (0,1)
OK
AT+
CGPSXDAUTO=0
OK
17.16 AT+CGPSINFOCFG Report GPS NMEA-0183 sentence
Description
This command is used to report NMEA-0183 sentence.
SIM PIN References
NO Vendor
Syntax
Test Command
Responses
AT+CGPSINFOCFG=? +CGPSINFOCFG: (scope of <time>),(scope of <config>),
(scope of
<bdconfig>)
SIMCOM CONFIDENTIAL FILE