SimCom SIM7500 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
244
AT+STKFMT? +STKFMT: <value>
OK
Write Command Responses
AT+STKFMT=<value>
OK
ERROR
Defined values
<value>
0 – Disable STK pdu format, decoded command mode.
1 – Enable STK pdu format
NOTE: 7100 default value 0, 7500/7600 default value 1.
Examples
AT+STKFMT=1
OK
11.6 AT+STENV Original STK PDU Envelope Command
Description
This command is used to original stk pdu envelope command.
NOTE: PDU format supported only.
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+STENV=?
OK
Write Command
Responses
AT+STENV=<len>,<pdu>
OK
ERROR
Defined values
<len>
Integer type, pdu string length
<pdu>
String type, pdu value
SIMCOM CONFIDENTIAL FILE

SimCom SIM7500 Series Specifications

General

Brand	SimCom
Model	SIM7500 Series
Category	Control Unit
Language	English