SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
400
OK
AT+CREC=0
+CREC: 0
OK
18.2 AT+CCMXPLAYWAV Play wav audio file
Description
This command is used to play a wav audio file. It can play wav file during a call or not.
NOTE
Wav file format require mono channel, 8kHz sampling frequency, 16bit sampling size,
128kbps.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CCMXPLAYWAV=? +CCMXPLAYWAV: (list of supported <play_path>s),(li
st of
supported <repeat>s)
OK
Write Command
Responses
AT+CCMXPLAYWAV=
<file_name>,<play_path>
+ WAV S TAT E : wav play
OK
Report URC automatically after playing end
+WAVSTATE: wav play stop
ERROR
Defined values
<file_name>
The name of wav audio file.
<play_path>
1 – remote path
2 – local path
<repeat>
This parameter is reserved.
SIMCOM CONFIDENTIAL FILE