SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
288
Defined values
<mode>
a numeric parameter which indicates whether adding an IP header to received data or not
0 – not add IP header
1 – add IP header, the format is “+IPD(data length)”
Examples
AT+CIPHEAD=?
+CIPHEAD: (0-1)
OK
AT+CIPHEAD=0
OK
15.2.5 AT+CIPSRIP Show Remote IP address and Port
Description
This command is used to set whether display IP address and port of sender when receiving data.
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+CIPSRIP=? +CIPSRIP: (list of supported <mode>s)
OK
ERROR
Read Command
Responses
AT+CIPSRIP? +CIPSRIP: <mode>
OK
ERROR
Write Command
Responses
AT+CIPSRIP=<mode> OK
ERROR
Execution Command Responses
AT+CIPSRIP
Set default value:
OK
Defined values
<mode>
SIMCOM CONFIDENTIAL FILE