SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
253
12.7 AT+CGSETV Set the value of specified GPIO
Description
This command is used to set the value of the specified GPIO to high or low.
SIM PIN References
NO Vendor
Syntax
Test Command
Responses
AT+CGSETV=? +CGSETV: (list of supported <GPIO>s),(list of supported <
gpio_hl >s)
OK
Write Command
Responses
AT+CGSETV=<GPIO>,<gp
io_hl>
OK
ERROR
Defined values
<GPIO>
The value is GPIO ID, different hardware versions have different values.
<gpio_hl>
0 – low
1 – high
Examples
AT+CGSETV=43,0
OK
12.8 AT+CGGETV Get the value of specified GPIO
Description
This command is used to get the value (high or low) of the specified GPIO.
SIM PIN References
NO Vendor
Syntax
SIMCOM CONFIDENTIAL FILE