SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
286
<mode>
0 – sending without waiting peer TCP ACK mode
1 – sending wait peer TCP ACK mode
Examples
AT+CIPSENDMODE?
+CIPSENDMODE: 1
OK
AT+CIPSENDMODE=1
OK
AT+CIPSENDMODE=?
+CIPSENDMODE: (0,1)
OK
15.2.3 AT+CIPTIMEOUT Set TCP/IP timeout value
Description
This command is used to set timeout value for AT+NETOPEN/AT+CIPOPEN/AT+CIPSEND.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CIPTIMEOUT=? OK
Read Command Responses
AT+CIPTIMEOUT? +CIPTIMEOUT: <netopen_timeout>, <cipopen_timeout>,
<cipsend_timeout>
OK
Write Command Responses
AT+CIPTIMEOUT=[<n
etopen_timeout>][,
[<cipopen_timeout>][,
[<cipsend_timeout>]]]
OK
ERROR
Defined values
<netopen_timeout>
Timeout value for AT+NETOPEN, default value is 120000 milliseconds.The range of this value is
SIMCOM CONFIDENTIAL FILE