SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
41
YES
3GPP TS 27.005
Syntax
Write Command Responses
ATX<VALUE>
OK
ERROR
Execution Command
Responses
ATX Set default value:1
OK
ERROR
Defined values
<value>
0 – CONNECT result code returned
1,2,3,4 – May be transmits extern result codes according to AT&E and AT\V settings. Refer to
AT&E.
Examples
ATX1
OK
3.24 AT\V Set CONNECT Result Code Format About Protocol
Description
This parameter setting determines wh
ether report the communication protocol. If PS call, it also
determines wether report APN, uplink rate, downlink rate.
SIM PIN References
YES 3GPP TS 27.005
Syntax
Write Command
Responses
AT\V<value> OK
ERROR
Execution Command Responses
AT\V Set default value: 0
OK
ERROR
SIMCOM CONFIDENTIAL FILE