SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
389
Syntax
Test Command Responses
AT+CGPSMODE=? +CGPSMODE: (scope of <mode>)
OK
Read Command Responses
AT+CGPSMODE? +CGPSMODE: <mode>
OK
Write Command
Responses
AT+CGPSMODE=<mode> OK
ERROR
Defined values
<mode>
0 – GPS and GLONASS hybrid, DPO is enabled, when position fixed, GLONASS will be closed
1 – GPS only
2 – GPS and GLONASS hybrid,DPO is disabled
Default value is 0
Examples
AT+CGPSMODE=0
OK
17.22 AT+CBDS Enable/Disable BEIDOU session
Description
This command is used to enable or disable BEIDOU session.
It will take effect only after restarting.
SIM PIN References
NO Vendor
Syntax
Test Command Responses
AT+CBDS=?
+CBDS: (scope of <mode>)
OK
Read Command Responses
AT+CBDS? +CBDS: <mode>
OK
SIMCOM CONFIDENTIAL FILE