SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
222
A – class A (highest)
Examples
AT+CGCLASS=?
+CGCLASS: ("A")
OK
AT+CGCLASS?
+CGCLASS: "A"
OK
9.14 AT+CGEREP GPRS event reporting
Description
The write command enables or disables sending of unsolicited result codes, “+CGEV” from MT to
TE in the case of certain events occurring in the Packet Domain MT or the network. <mode>
controls the processing of unsolicited result codes specified within this command. <bfr> controls
the effect on buffered codes when <mode> 1 or 2 is entered. If a setting is not supported by the MT,
ERROR or +CME ERROR: is returned.
Read command returns the current <mode> and buffer settings.
Test command returns the modes and buffer settings supported by the MT as compound values.
SIM PIN References
YES 3GPP TS 27.007
Syntax
Test Command Responses
AT+CGEREP=? +CGEREP: (list of supported <mode>s),(list of supported <bfr>s)
OK
ERROR
Read Command
Responses
AT+CGEREP? +CGEREP: <mode>,<bfr>
OK
ERROR
Write Command Responses
AT+CGEREP=
<mode>[,<bfr>]
OK
ERROR
+CME ERROR: <err>
Execution Command Responses
AT+CGEREP OK
ERROR
SIMCOM CONFIDENTIAL FILE