SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
270
15 AT Commands for Internet Service
15.1 PDP
15.1.1 AT+CSOCKSETPN Set active PDP context’s profile number
Description
This command sets default active PDP context’s profile number. W
hen we activate PDP by using
AT+NETOPEN
command, we need use the default profile number, and the context of this profile is
set by AT+CGCONT command.
SIM PIN References
YES Vendor
Syntax
Test Command
Responses
AT+CSOCKSETPN=?
+CSOCKSETPN: (list of supported <profile_number>s)
OK
ERROR
Read Command Responses
AT+CSOCKSETPN?
+CSOCKSETPN: <profile_number>
OK
ERROR
Write Command Responses
AT+CSOCKSETPN=<profil
e_number>
OK
ERROR
Execution Command Responses
AT+CSOCKSETPN OK
ERROR
Defined values
<profile_number>
A numeric parameter that identifies default profile number, the range of permitted values is one to
sixteen.
1…24,100…179
SIMCOM CONFIDENTIAL FILE