Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
The rest size of the file.
The final result of the sending.
Examples
AT+CFTPSPUT=”t1.txt”,10
OK
+CFTPSSPUT: 0
+CFTPSPUT: 88
OK
15.4.13 AT+CFTPSSINGLEIP Set FTPS data socket address type
Description
This command is used to set FTPS server data socket IP address type
SIM PIN References
YES Vendor
Syntax
Test Command Responses
AT+CFTPSSINGLEIP=? +CFTPSSINGLEIP: (0,1)
OK
AT+ C FTPSSINGLEIP? + CFTPSSINGLEIP: <singleip>
OK
Write Command Responses
AT+CFTPSSINGLEIP=<sin
gleip>
OK
ERROR
Defined values
<singleip>
The FTPS data socket IP address type:
0 – decided by PORT response from FTPS server
1 – the same as the control socket.
To Next Page
Loading...
