SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
96
OK
5.13 AT+CNAOP Acquisitions order preference
Description
This command is used to reset the state of acquisitions order preference.
SIM PIN References
NO Vendor
Syntax
Read Command Responses
AT+CNAOP? +CNAOP: <mode>[,<sys_mode1>,[<sys_mode2>[,<sys_mode3>[,
<sys_mode4>[,<sys_mode5>[,<sys_mode6>]]]]]]
OK
Write Command
Responses
AT+CNAOP=<mode>[,<sys
_mode1>[,<sys_mode2>[,<sy
s_mode3>[,<sys_mode4>[,<s
ys_mode5>[,<sys_mode6>]]]
]]]
OK
ERROR
Defined values
<mode>
7 – Acquistion by priority order list <sys_moden>s.
<sys_mode
n
>
sys_mode values:
2 – CDMA
3 – GSM
4 – HDR
5 – WCDMA
9 – LTE
11 – TDSCDMA
Examples
AT+CNAOP=7,9,5,3,11,2,4
OK
AT+CNAOP?
+CNAOP: 7,9,5,3,11,2,4
SIMCOM CONFIDENTIAL FILE