SimCom SIM7500 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
375
17.6 AT+CGPSSSL Set AGPS transport security
Description
This command is used to select transport security, used certificate or not. The certificate gets from
local carrier. If the AGPS server doesn’t need certificate, execute AT+CGPSSSL=0.
SIM PIN References
NO
Vendor
Syntax
Test Command Responses
AT+CGPSSSL=? +CGPSSSL: (list of supported <SSL>s)
OK
Read Command Responses
AT+CGPSSSL? +CGPSSSL: <SSL>
OK
Write Command
Responses
AT+CGPSSSL=<SSL>
OK
ERROR
Defined values
<SSL>
0 – don’t use certificate
1 – use certificate
Examples
AT+CGPSSSL=0
OK
17.7 AT+CGPSAUTO Start GPS automatic
Description
This command is used to start GPS automaticly when module powers on, GPS is closed defaultly.
NOTE: If GPS start automatically, its operation mode is standalone mode.
SIM PIN References
NO Vendor
Syntax
SIMCOM CONFIDENTIAL FILE

SimCom SIM7500 Series Specifications

General

Brand	SimCom
Model	SIM7500 Series
Category	Control Unit
Language	English