SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
34
Examples
AT+ICF?
+ICF: 3,3
OK
AT+ICF=?
+ICF: (1-6),(0-3)
OK
AT+ICF=3,3
OK
3.14 AT+IFC Set local data flow control
Description
The command sets the flow control mode of the module.
SIM PIN References
NO V.25ter
Syntax
Test Command Responses
AT+IFC=?
+IFC: (list of supported<DCE>s), (list of supported<DTE>s)
OK
ERROR
Read Command Responses
AT+IFC?
+IFC: <DCE>,<DTE>
OK
ERROR
Write Command Responses
AT+IFC=<DCE>[,<DTE>] OK
ERROR
Execution Command
Responses
AT+IFC Set default value:
OK
ERROR
Defined values
<DCE>
0 – none (default)
2 – RTS hardware flow control
SIMCOM CONFIDENTIAL FILE