SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
224
AT+CGEREP=?
+CGEREP: (0-2),(0-1)
OK
AT+CGEREP?
+CGEREP: 0,0
OK
9.15 AT+CGAUTH Set type of authentication for PDP-IP connections of
GPRS
Description
This command is used to set type of authentication for PDP-IP connections of GPRS.
SIM PIN References
YES Vendor
Syntax
Test Command
Responses
AT+CGAUTH=?
+
CGAUTH
:, ,
127 ,127
(for CDMA1x-EvDo only)
+CGAUTH:(range of supported <cid>s),(list of supported <auth_-
type> s),127,127
(NOTE: the first line of the response is for CDMA 1x a
nd Evdo
only)
OK
ERROR
+CME ERROR: <err>
Read Command
Responses
AT+CGAUTH? +CGAUTH: ,,"user ","passwd"(for CDMA1x-EvDo only)
+CGAUTH:[ <cid>,<auth_type>[,<user>,<passwd>]]<CR><LF>
…
OK
ERROR
+CME ERROR: <err>
Write Command Responses
AT+CGAUTH=<cid>[,<aut
h_type>[,<passwd>[,<user>]
]]
OK
ERROR
AT+CGAUTH=,,<user>,<pa
SIMCOM CONFIDENTIAL FILE