Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
Short result code format: <numeric code><CR>
1 Information response: <CR><LF><text><CR><LF>
Long result code format: <CR><LF><verbose code><CR><LF>
Examples
ATV1
3.21 AT&F Set all current parameters to manufacturer defaults
Description
This command is used to set all current parameters to the manufacturer defined profile.
NOTE:List of parameters reset to manufacturer default can be found in defined values, factory
default settings restorable with AT&F[<value>].
Every ongoing or incoming call will be terminated.
SIM PIN References
NO V.250
Syntax
Execution Command Responses
AT&F[<value>] OK
Defined values
<value>
0 — Set some temporary TA parameters to manufacturer defaults. The setting after power on or reset is
same as value 0.
default values
TA parameters VALUE
AT+ CAT R 0
AT+ CN MP 2
AT+CNAOP ①
7,9,4,2,5,3,11
AT+CTZU 0
AT+CVAUXV 2850
① The default value of no CDMA/EVDO version is 7,9,5,3,11,2,4
Examples
AT&F
To Next Page
Loading...
