SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
133
NO
Vendor
Syntax
Test Command Responses
AT+MORING=? +MORING: (0-1)
OK
Read Command Responses
AT+ MORING? + MORING: <mode>
OK
Write Command
Responses
AT+MORING=<mode> OK
ERROR
Defined values
<mode>
Enable or disable report MO ring URC:
0 – disable
1 – enable.
Examples
AT+MORING=1
OK
AT+MORING?
+MORING:1
OK
AT+MORING=?
+MORING: (0-1)
OK
6.22 AT+CSDVC Switch voice channel device
Description
This command is used to switch voice channel device. After changing current voice channel device
and if there is a connecting voi
ce call, it will use the settings of previous device (loudspeaker
volume level, mute state of loudspeaker and microphone, refer to AT +C LVL, AT+VMUTE, and
AT+ CM U T ).
SIM PIN References
SIMCOM CONFIDENTIAL FILE