SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
202
range>,<ipsec security parameter index (spi)>,<type of service (tos)
(ipv4) and mask / traffic class (ipv6) and mask>,
<flow label
(ipv6)>
[<CR><LF>+CGTFT: <cid>,<packet filter identifier>,<evaluation
precedence index>,<source address and subnet mask>,
<protocol
number (ipv4) / next header (ipv6)>,
<destination port
range>,<source port range>,
<ipsec security parameter index
(spi)>,<type of service (tos) (ipv4) and mask / tr
affic class (ipv6)
and mask>,<flow label (ipv6)>
[...]]]
OK
ERROR
Write Command Responses
AT+CGTFT=<cid>[,[<packe
t filter
identifier>,<evaluation
precedence index>[,<source
address and subnet
mask>[,
<protocol number
(ipv4) / next header
(ipv6)>[,<dest
ination port
range>[,
<source port
range>[,
<ipsec security
parameter index
(spi)>[,
<type of service (tos)
(ipv4) and mask / traffic
class (ipv6) and
mask>[,
<flow label
(ipv6)>]]]]]]]]]
OK
ERROR
Execute Command Responses
AT+CGTFT
OK
ERROR
Defined values
<cid>
a numeric parameter which specifies a particular PDP context definition (see theAT+CGDCONT
and AT +CGDSCONT commands).
<PDP_type>
(Packet Data Protocol type) a string parameter which specifies the type of packet data protocol.
IP Internet Protocol
SIMCOM CONFIDENTIAL FILE