SimCom SIM7500 Series User Manual

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
284
AT+CIPCCFG=? +CIPCCFG: (list of supported <NmRetry>
s),(list of supported
<DelayTm>s),(list of supported <Ack>s),(list of supported
<errMode>s),(list of supported <HeaderType>
s), (list of supported
<AsyncMode>s), (list of supported <TimeoutVal>s)
OK
ERROR
Read Command Responses
AT+CIPCCFG? +CIPCCFG:<NmRetry>,<DelayTm>,<Ack>,<errMode>,<Header-
Type>,<AsyncMode>,<TimeoutVal>
OK
ERROR
Write Command Responses
AT+CIPCCFG=[<NmRetry>
][,[<DelayTm>][,[<Ack>][,[
<errMode>][,]<HeaderType
>][,[[<AsyncMode>][,[<Tim
eoutVal>]]]]]]]]
OK
ERROR
Execution Command Responses
AT+CIPCCFG Set default value:
OK
Defined values
<
NmRetry>
a numeric parameter which is number of retransmission to be made for an IP packet.The default
value is 10.
<DelayTm>
a numeric parameter which is number of milliseconds to delay to output data of Receiving.The
default value is 0.
<Ack>
NOTE: This parameter is only used to be compatible with old TCP/IP command set.
<errMode>
a numeric parameter which sets mode of reporting error result code.
0 error result code with numeric values
1 error result code with string values
< HeaderType >
a numeric parameter that select which data header of receiving data, it only takes effect in
multi-client mode.
0 add data header, the format is “+IPD<data length>”
1 add data header, the format is “+RECEIVE,<link num>,<data length>”
SIMCOM CONFIDENTIAL FILE

SimCom SIM7500 Series Specifications

General

Brand	SimCom
Model	SIM7500 Series
Category	Control Unit
Language	English