SimCom SIM7500 Series

Smart Machine Smart Decision
SIM7500_SIM7600 Series_AT Command Manual_V1.07 2017-12-25
393
Syntax
Test Command Responses
AT+CLBS=? +CLBS:
(1,2,3,4,9),(1-24,100-179),(-180.000000-180.000000),(-90.000000-
90.000000),(0,1)
OK
Write Command Responses
AT+CLBS=<type>[,<cid>[,
[<longitude>,<latitude>],[<l
on_type>]]]
OK
1)type = 1,get longitude and latitude
+CLBS: <ret_code>[,<longitude>,<latitude>,<acc>]
2)type = 2,get detail address
+CLBS: <ret_code>[,<detail_addr>]
3)type = 3,get access times
+CLBS: <ret_code>[,<times>]
4)type = 4,get longitude latitude and date time
+CLBS:
<ret_code>[,<longitude>,<latitude>,<acc>,<date>,<time>]
5)type = 9, report positioning error
+CLBS: <ret_code>
ERROR
+CLBS: <ret_code>
ERROR
Defined values
<type>
A numeric parameter which specifies the location type.
1 use 3 cell’s information
2 get detail address
3 get access times
4 get longitude latitude and date time
9 report positioning error
<cid>
A numeric parameter which specifies a particular PDP context definition (see AT +CGDCONT
command).
SIMCOM CONFIDENTIAL FILE