Spectra Precision Focus 30 - Page 216

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 86 P/N 79000035_SM, Version 1.5
Fig. 5-65 Remove Slip ring board SRB
8 Remove Tension gear
V.
A. Loosen the locking
screw.
B. Unscrew the Retainer
ring with Universal
slot wrench.
C. Lever out the
Clamping ring.
D. Take out carefully
the Tension gear V
together with the
Clamping tool V.
E. Press the tension gear
and remove the
clamp tool.
40Ncm/
3.54Lbfin
The Tension gear
consists of two
cogwheels preloaded
by two extension
springs. The inner
diameter of the
Tension gear is
married to the axis.
Item Performance Action Result Notes
A
B
C