Spectra Precision Focus 30 Service Manual

Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 2 P/N 79000035_SM, Version 1.5
Servo Focus Unit F30
• Clean and regrease (maintenance)
• Check Servo Focus Unit F30 specifications
• Servo Focus Unit HA/VA collimation short range test
Tools and equipment
Clean and regrease (maintenance)
Performance
Description Part number
Holder SFU F30 79295035
Cable SFU connection F30, 8pin/8pin (consist of 2x Adapter 8pin/10pin, 1x
Cable 10pin/10pin, 1x Cable 8pin/8pin)
79296035
Grease BEM 34-32 55000311
TORX T6 & T8 bit Local tool
Reticle illumination tool (yellow LED) 79706001
1.5 m target Local tool
Item Performance Description Result Notes
1 Remove the Servo
Focus Unit (SFU).
See “Servo focus
replacement” on page 5-
5. for instructions.
2 Prepare for
maintenance.
A. Mount the SFU at the
holder.
B. Protect the lens with
the cover.
C. Connect the SFU
with the adapter and
cable combination to
the instrument.
Connection
between MCB
and TSF board.
79295035 Holder
SFU F30ervo focus
unit
Tracker and Distance
unit will be missing
when instrument
starts up.

Spectra Precision Focus 30 Specifications

General

Brand	Spectra Precision
Model	Focus 30
Category	Measuring Instruments
Language	English