Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 12 P/N 79000035_SM, Version 1.5
Reticle F30
• Check Reticle collimation (HA/VA collimation)
• Erecting the Reticle F30
• Adjustment of Reticle F30
• Trunnion Axis Correction
• Check of Reticle illumination
Tools and equipment
Check Reticle collimation (HA/VA collimation)
Performance
Description Part number
PASS Service software
Screw driver Torx T8 local
Torque screw driver 120Ncm local
1,5 allen key (2x) local
Reticle erecting tool 79290035
Reticle illumination tool (yellow LED) 79706001
Front lens mirror 79292035
Item Performance Description Result Notes
1 Run the tilt offset See “Calibration Fine tilt
sensor” on page 6-139.
To Next Page
Loading...
