Spectra Precision Focus 30 Service Manual

Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 168 P/N 79000035_SM, Version 1.5
Service check list
• Focus 30 Check list after service/repair
This chapter includes a check list. The checklist is a guide to be used after service/repair of the
instrument. After the complete check list the instrument should be ready for delivery to the customer.
For information what to do after replacing a service part / module, see page 5-121.
Focus 30 Check list after service/repair
[ ] 1. Check current update on webpage
[ ] 2. Perform Tilt sensor offset
[ ] 3. Perform Servo Focus Unit short range collimation
[ ] 3. Perform HA/VA collimation
[ ] 4. Perform Trunnion axis correction
[ ] 5. Perform Tracker collimation test and function test
[ ] 6. Perform Servo drive test
[ ] 7. Perform an Angle drive test
[ ] 8. Check distances on baselines
[ ] 9. Radio range & short range test - Robotic only.
[ ] 10. Set Service date for next maintenance
[ ] 11. Save constants, error & event log
[ ] 12. Check accessories

Spectra Precision Focus 30 Specifications

General

Brand	Spectra Precision
Model	Focus 30
Category	Measuring Instruments
Language	English