Spectra Precision Focus 30 - Instrument data;constants management; Instrument status check

Chapter 4
Troubleshooting
Focus 30/35 Service Manual 4 - 2 P/N 79000035_SM, Version 1.5
Instrument data/constants management
Instrument status check
Performance
Item Performance Action Result Notes
1 Start up instrument /
PASS.
See page 7-3 how to set-
up the instrument.
2 Start status check. Select
Instrument status
check
from Instrument
data
in Analyze and press
Run Operation.
Collecting data
from all sensors
and shows an
overview with
serial number,
FW version and
status.
The complete report
can be stored or direct
printed.
Fig. 4-1 Instrument status check Focus 30/35