Spectra Precision Focus 30 - Assembly base unit

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 47 Focus 30/35 Service Manual
Assembly base unit
Performance
6 Remove base part. A. Remove four
screws.
B. Take out the Base
part.
C. For further
disassembling plug
out the Clamping
tool.
Torx T20
200Ncm/16,7 lbfin
Fig. 5-38 Remove Base part
Item Performance Action Result Notes
1 Remove Slip ring
board SRB.
A. Remove three
screws.
B. Disconnect cable
SRB-FCB.
C. Take off the Slip
ring board.
Torque wrench
Torx T8
60Ncm/5,31lbfin
Item Performance Action Result Notes
A
B
A