Spectra Precision Focus 30 - Tracker unit; Disassembly;Assembly Tracker transmitter; Disassembly;Assembly Tracker receiver F30

Chapter 5
Maintenance and Repair
P/N 79000035_SM, Version 1.5 5 - 23 Focus 30/35 Service Manual
Tracker unit
• Disassembly/Assembly Tracker transmitter
• Disassembly/Assembly Tracker receiver F30
Tools and equipment
Disassembly/Assembly Tracker transmitter
The Tracker transmitter is a component part of the Transmitter unit F30, see page 5-18
Disassembly/Assembly Tracker receiver F30
Performance
Description Part number
Torx T8 bit Local tool
Torque wrench 120 Ncm T71600280
Item Performance Action Result Notes
1 Remove Servo
focus cover.
see page 5-2
2 Remove Tracker
servo focus board.
see page 5-5
3 Exchange Tracker
receiver (camera).
A. Unscrew the two
screws.
B. Lift off the tracker
camera module.
C. Insert new tracker
camera unit and
shift it to the end
stops.
D. Tighten two
screws.
60Ncm/5,31lbfin
Torx T8
The module is
preadjusted.
Torque wrench
Torx T8