Spectra Precision Focus 30 - Page 244

Chapter 5
Maintenance and Repair
Focus 30/35 Service Manual 5 - 114 P/N 79000035_SM, Version 1.5
4 Mount adjustable
divided lever arm
A. Fit the spring
between the two
parts of the divided
lever arm and hook
the lever arm
behind the Fine
drive pin (red
arrow).
B. Screw in the two
fixing screws and
tighten it.
C. Screw in the
adjusting screw
untill the two parts
have contact.
D. Hook the extension
spring in to the hole
of the lever arm.
This procedere avoids
a demage of the light
barrier.
Torque wrench T6
40 Ncm/3,54bfn
Fig. 5-85 Assembly the divided adjustable lever Hz
Item Performance Action Result Notes
A
B
C
Fine drive pin
Lever arm
D
Extension spring