Spectra Precision Focus 30 - Page 268

Chapter 6
Adjustment and Verification
Focus 30/35 Service Manual 6 - 14 P/N 79000035_SM, Version 1.5
Fig. 6-8 Reticle adjustment-leveling instrument
3 Check erection of
Reticle
A. Aim the collimator
reticle with the upper
line end and check
the lower line end for
deviation, see Fig. 6-
15 on page 6-22 .
B. If out of tolerance go
to See “Erecting the
Reticle F30” on
page 6-19.
Tolerance:
1 line width
=10cc
Compare the reticle
ends in the collimator
field of view.
Item Performance Description Result Notes