Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 83 Focus 30/35 Service Manual
Fig. 6-68 Message box Release Measurement)
Fig. 6-69 EDM Offset determination - single measurement succeeded
Item Performance Action Result Notes
Laser pointer a help to position
the instrument.
Position positions the instrument
to the next target, ONLY if the angles to the
targets are set in the baseline editor.
Set Hz orientation
Position
to the first target, so the
software will automatically position the
instrument to the next target. after
was pressed.
Measure the distance
to the target.
Skip allows to skip a baseline in the
list and continue to the next.
Cancel terminates the offset determination.
To Next Page
Loading...
