Spectra Precision Focus 30 - Page 415

Chapter 6
Adjustment and Verification
P/N 79000035_SM, Version 1.5 6 - 161 Focus 30/35 Service Manual
Fig. 6-123 Trunnion axis correction
Alternative perform the Trunnion Axis Correction with
application software
Survey Pro.
1 Trunnion axis
correction
A. Disconnect the
instrument from
PASS, restart the
instrument and run
the test from
SurveyPro as shown
on the instruction.
Follow the
instructions in
the appearing
window.
Execute the operation
in
Survey Pro. The
corrections will be
stored as customer
value in the MCB
memory.
Item Performance Action Result Notes