P/N 79000035_SM, Version 1.5 2016-09-30
The compliance to the applicable requirements is
detailed in the official Declaration of Conformity
document, which is filed at Trimble.
Australia and New Zealand
This product conforms with the
regulatory requirements of the
Australian Communications
Authority (ACA) EMC framework, thus satisfying the
requirements for C-Tick Marking and sale within
Australia and New Zealand.
Canada
This Class B digital apparatus complies with Canadian
ICES-003
This digital apparatus does not exceed the Class B
limits for radio noise emissions from digital apparatus
as set out in the radio interference regulations of the
Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits
radioélectriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le
règlement sur le brouillage radioélectrique édicté par le
Ministère des Communications du Canada.
This device has been designed to operate with an
antenna having a maximum gain of 2.0 dBi. Antenna
having a higher gain is strictly prohibited per
regulations of Industry Canada. The required antenna
impedance is 50 ohms. To reduce potential radio
interference to other users, the antenna type and its
gain should be so chosen that the equivalent
isotropically radiated power (EIRP) is not more than
that required for successful communication. Operation
is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device
must accept any interference, including interference
that may cause undesired operation of the device.
Taiwan – Battery Recycling Requirements
The product contains a removable Lithium-ion
battery. Taiwanese regulations require that waste
batteries are recycled. Notice to Our European
Union Customers
For product recycling instructions and more
information, please go to www.trimble.com/ev.shtml.
Recycling in Europe: To recycle Trimble
WEEE (Waste Electrical and Electronic
Equipment, products that run on electrical
power.), Call +31 497 53 24 30, and ask for
the "WEEE Associate". Or, mail a request for
recycling instructions to:
Trimble Europe BV
c/o Menlo Worldwide Logistics
Meerheide 45
5521 DZ Ersel
Declaration od Conformity
To view the Declaration of Conformity for this
product:
Go to the Partners website at
1. http://partners.spectraprecision.com
2. In the panel on the left, click Land Survey.
3. Go to Technical Support/Documentation/Trimble
S6 Total Station Documentation/Declaration of
Conformity.
4. Select the relevant file. It is in Adobe Portable
Document Format (PDF).
Alternatively, view the Declaration of Conformity in
the front of the relevant user guide.
To Next Page
Loading...
Need help?
General
