P/N 79000035_SM, Version 1.5 Page 1 Focus 30/35 Service Manual
Manual Change Log
Manual version
Version Date Changes
0.01 2008-11-25 Create the book & chapters according templates
1.0 2010-12-24 Inital release of Service manual
1.1 2011-06-31 Change tolerances for adjustment reticle, bubble, tracker according
service software PASS 2.1.
Change document number from 78000035 to 79000035_SM.
1.2 2012-06-30 Introduce adjustable Lever arms, System Monitor and Diagnostics
1.2.1 2013-05-01 Less improvements, Torx T10 clamping tool Wiha
1.3.0 2013-10-01 Implementation Collimator Monitor software description,
improvements
1.3.1. 2014-11-03 Rename to Focus 30/35; Ch.5 improvement 500Ncm for retainer ring
1.3.2 2015-07-06 Tolerance for coarse tilt adjustment set to 1400cc, PASS module
improved.
1.4 2016-06-10 Added Focus 35 RX, 2nd Battery compartment instead of Control
unit.
Distortion of cogwheel changes from three to one tooth.
Minor improvements in description.
1.5 2016-09-30 PUK code generation, EDM High Precision 1mm
To Next Page
Loading...
Need help?
General
