Export the Encryption Key
Use the following steps to export the current encryption key:
1. Access the encryption feature (see Log Into Encryption Standard on page119).
2. If you want to export the encryption key to a USB device, plug a USB device
into the USB port on the Controller Module.
3. From the Configuration > Encryption > Encryption Standard screen, click Export
Key. The Export Key dialog box displays.
Figure74 The Export Key dialog box.
4. On the Export Key screen, enter and verify a password using any combination
of the numbers 0–9, lower and upper case alphabetic characters (a–z and A-Z),
and the at symbol (@), dash (–), underscore (_), and period (.) characters. This
password is used to encrypt the exported key.
JANUARY 2023 126
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING AND USING ENCRYPTION
To Next Page
Loading...
