Spectra Stack Tape Library - Enabling SNTP (Simple Network Time Protocol) Synchronization68; Enabling SNTP (Simple Network Time Protocol) Synchronization

2. Set the time and date.
To set the time and date manually:
a. Enter the time in the configured time format.
b. Enter the date or select it from the calendar.
To synchronize the time and date with the computer running the browser, click
Now.
3. Click Submit.
Enabling SNTP (Simple Network Time Protocol)
Synchronization
To enable SNTP, the library must have network access to an SNTP server.
1. On the Date and Time Format screen, if necessary, click SNTP to expand the
section.
Figure19 Enable SNTP.
2. Select the SNTP Enabled check box.
3. Enter the SNTP Server address.
4. Click Submit.
JANUARY 2023 68
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY