MODIFY BARCODE LABEL CHECKSUM TYPE
You can select the checksum behavior from the Configuration > System > Modify
Barcode Label Type screen. You cannot mix checksummed and non-checksummed
barcodes in a library. Checksummed barcodes are selected by default.
Figure21 The Modify Barcode Label Type screen.
From the drop-down menu, select whether the library uses Non-checksummed
barcodes or Checksummed barcodes, and then click Submit. Changing the setting
initiates an inventory scan which can take several minutes to complete.
JANUARY 2023 70
SPECTRA STACK LIBRARY
USER GUIDE
CHAPTER 3 - CONFIGURING THE LIBRARY
To Next Page
Loading...
